360 Degree Fisheye Panoramic IP Camera 1.3 Megapixel 960P Wireless Wifi 2.4GHZ
installation Detail Steps:
Firstly, Scan the two-dimensional code to download the APP, and open it.
Press the reset button once,to turn on AP mode.
Connect the AP WIFI in mobile network setting(SSID start with MV)
Click 'Add Manually' on APP (the Device ID is on the bottom of the camera)
then Press Add to list. ok, this is AP mode, it can work without router.
Press the Settings–Network–Station,Here you can setting your WIFI name and password.
Connect your WIFI in mobile network setting, Now, your camera connect to your WIFI Succeed.
installation methods :
1,installation with the screws,it will let your camera so solid.
2,use 3M sticker, this method let you install it in 5 seconds,so easy!very convenient
1. First scan the OR code on the user manual, download the app (the app's name is: V380).
2. Power on the camera.
Long press the RESET key at the back of the product to restore the factory settings, you'll be prompted with voice when it is completed.
Wait for the product to configure the network. At this time there will be a voice prompt.
After the configuration is complete, you'll receive a voice cue.
Then click into the local connection (you can also register by your own), and then click wifi intelligent pairing, enter the page and find your own wifi.
Enter the wifi password, and then click Next. At this time the phone will go into the search state (it will make sounds when the phone is at this state) and make your phone close to the camera.
Quick Installation Guide×1